R232A-BBF Propane 2-Stage Regulator – Integral Dual Stage LP Gas Tank Regulators, 10.2"-13" Water Column Spring, 550,000 BTU, 1/4" x 1/2" FNPT, 250 psig Max Inlet

The Type R232A is an Underwriters Laboratories (UL) listed regulator designed for LP-gas (propane) systems. The unit is designed to reduce the tank pressure to an Outlet pressure of 11 inches Water Column through an integral two-stage system. Designed for installations with small domestic loads. The units compact size makes it ideal for tight fit applications. The first-stage Screened drip-lip vent is oriented downward and the second-stage vent is oriented over the Outlet as standard. !!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment. BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.

• Certified 2-Stage Pressure Stability: UL-listed propane regulator reduces tank pressure through an integral 2-stage system to maintain a 10.2”–13” WC outlet range for controlled LP gas flow in residential and small domestic load applications
• Compact Fit For Tight Installations: Space-saving 7” x 5” x 5” regulator body fits tight propane tank compartments, generator enclosures, RV or camper setups, and small residential LP systems where full-size regulators can’t be installed
• High Capacity Performance You Can Count On: Handles up to 550,000 BTU per hour with a maximum 250 psig inlet rating and maintains consistent gas pressure for heater, grill, furnace, and whole house LP-gas equipment
• Secure FNPT Connections For Easy Replacement: 1/4” FNPT inlet x 1/2” FNPT outlet supports common propane tank and gas line configurations, compatible with LP tanks, 100lb cylinder systems, and regulator replacement installations
• Proper Vent Design For Code Compliant Setup: First stage 7/16-24 inverted flare screened drip-lip vent faces downward, and second stage 3/8 NPT screened vent is positioned over the outlet for proper regulator operation per NFPA 54 and 58 standards