2.8inch SPI 320x240 RGB TFT Touch LCD Display Module ILI9341 Driver 320 * 240 with SD Card Socket 3.3V/5V IPS LCD

1.Descriptions: It is a 2.8 inch TFT touch color LCD screen.The LCD module adopts 4-wire SPI communication mode,the driver IC is ILI9341,the resolution is 240x320,and it has touch function.The module contains LCD display screen,backlight control circuit and touch screen control circuit.2.Feature: 1>.2.8-inch color screen,support 65K color display,display rich colors 2>.320*240 HD resolution,optional touch function 3>.Using SPI serial bus,only need a few IO can light up the display 4>.With SD card slot for easy expansion experiment 5>.Military-grade process standard,long-term stable work 6>.Provide low-level drive technical support3.Descriptions: 1>.Product Name:2.8 Inch TFT Touch Color LCD Screen 2>.Display Color:RGB 3>.Screen Size:2.8 inch 4>.Type:TFT 5>.Driver IC:ILI9341 6>.Resolution:320*240(Pixel) 7>.Module Interface:4-wire SPI interface 8>.VCC Power Voltage:3.3V~5V 9>.Logic IO Port Voltage:3.3V(TTL) 10>.Power Consumption:TBD 11>.Work Temperature:-20℃~60℃ 12>.Storage Temperature:-30℃~70℃ 13>.Work Humidity:5%~95%RH 14>.Active Area(AA area):43.2x57.6mm 15>.Module Size:87*51*17mm 16>.Touch Pen:88*8*5mm5.Interface Definition: 1>.VCC:3.3V power input 2>.GND:Ground(Input power negative) 3>.CS:LCD chip select signal,low level enable 4>.RESET:LCD reset signal,low level reset 5>.DC/RS:LCD register/data selection signal(high level:register,low level:data) 6>.SDI(MOSI):SPI bus write data signal 7>.SCK:SPI bus clock signal 8>.LED:Backlight control,high level lighting,if not controlled,connect 3.3V always bright 9>.SDO(MISO):SPI bus read data signal,if you do not need to the read function,you can not connect it 10>.T_CLK:Touch SPI bus clock signal 11>.T_CS:Touch screen chip select signal,low level enable 12>.T_DIN:Touch SPI bus input 13>.T_DO:Touch SPI bus output

• 2.8inch SPI 320x240 RGB TFT Touch LCD Display Module ILI9341 Driver 320*240 with SD Card Socket 3.3V/5V IPS LCD